SUMMARY STEPS

1. enable

2. configure terminal

3. router bgp autonomous-system-number

4. neighbor {ip-address | peer-group-name} remote-as autonomous-system-number

5. neighbor ip-address fall-over [route-map map-name]

6. exit

7. ip prefix-list list-name [seq seq-value] {deny network/length | permit network/length} [ge ge-value] [le le-value]

8. route-map map-name [permit | deny] [sequence-number]

9. match ip address prefix-list prefix-list-name [prefix-list-name...]

10. end

Read more here.