More Help From The Reader Comments

Also remember that if your pc is grinding you need to set your idlepc value. So the best way to do this is start one router only. Then telnet to it press enter to get the telnet window to show something. Hit enter one more time what till all the interface status messages have appeared. Close the telnet window. Then in the dynagen window type idlepc get R1 this should present you with a list of idle values and the ones with a * next to them are the recommended ones for your pc. You will then need to check each of the values till you get one that does not hammer your processor and when you have found the optimal value for your pc you need to add the idle value to your .net file.

Thank you very much. Investigating further at this time.